Help! TM DE Mag Leak
 

Hey,

All of the sudden, my TM Desert Eagle's magazine leaks. A Lot.

I couldn't find a previous post anywhere describing the mag leaking from where mine is... so yeah, here goes...

As soon as I pull the propane away from the fill valve, you can see, and hear, it -all- spray out of the button piece that the hammer hits in the matter of like, 2 seconds...

What should I do?

I assume I'll have to tear it apart, but then what?

Thanks,
Mir

I had that same problem.
what i did was:
push on the release buton and spray silicon whare the gas comes out normaly. this put the silicon inside the mag.
then, i sprayed silicon into a ziploc bag. enough so that when i put the mag in and ajusted the bag acordingly the place ware the gas was leaking out was coverd in silicon. i then let it sit over night (one or two i cant remember) and when i took it out it worked.
try that, if it dosnt work you probably need to replace the seals in the mag.

http://airsoftcanada.com/showthread....ghlight=DE+mag

I had the exact same problem, which was fixed the same way. :) I disassembled the magazine, cleaned and wiped down all the parts, re-sprayed on a decent amount of silicone, and when I put it back together it worked fine.

Other than that, yeah, you might have to get new seals for it. But there's a good chance reassembling it will work.

That happened to my Deagle mag as well. So I took the mag apart and lubed the value with some thick silicone oil and I also lubed the rubber where the gas comes out and it worked fine.