Puxing 888K Radios ...
 

So I ordered and then picked up 3 Puxing 888K's from North Trail Sports yesterday.

I know there have been a lot of threads in the past about issues programming them, and I went through quite my own issues as well.

Regardless of the Prolific driver I had tried to use, I kept having issues properly connecting to the radios.

So I did a system restore and tried the 3.2.0.0 drivers found here ...

http://miklor.com/COM/UV_Drivers.php

And I used the older Puxing 888 UV software (although now that the drivers work the latest software may also work).

http://blog.murs-radio.com/?page_id=416

And I finally got it with my Window's 7 laptop.

I hope it helps.

Dimitri

Will try, thanks. Had given up and programmed mine manually, but having the option of software would be nice.

Just make sure you wipe out ALL previous Prolific Drivers from your PC, I actually had to do a system restore to get 3.2.0.0 working in the end to erase all the installed drivers I had tried to that point.

But it did end up working. :D

Dimitri

Manual made easy

Enter button changes from A to B channels.. Start out in ACH 1 . Turn know on top to get there. Dont worry about B it programs for both. Then push your ESC till the M disappears on the left. Type in ^ digit code for channel 1 . Then press ESC 4 times and M will disappear again. Then press menu then ESC and the M will flash. Type in you channel with a 0 in front..eg. 001 (channel 1 ) Then press ESC 2 times and thats it. To program the next channel 2 turn knob to CH2 and repeat. And all the way to 30

More Detail?
http://www.airsoftcanada.com/showthread.php?t=128892