Airsoft Canada - TM M4 S-System full stock ?

Airsoft Canada (https://airsoftcanada.com/forums.php)

- Upgrades & Modifications (https://airsoftcanada.com/forumdisplay.php?f=24)

- - TM M4 S-System full stock ? (https://airsoftcanada.com/showthread.php?t=13031)

Syrinx

June 8th, 2005 00:37

TM M4 S-System full stock ?

Hi... I'm looking into buying a TM M4 S-System and I was woundering if you could mount a SR-16 Full Stock on it ? Is the S-System as the same "attachement" for the stock as the old M4 series ??

Thanks

Slick

June 8th, 2005 00:48

Yes it will fit.

Syrinx

June 8th, 2005 00:57

Quote:

Originally Posted by Slick

Yes it will fit.

Thanks for the answer... So I presume the stock attached itself the same way as it does on the older model then ??? Does it require any modification ??

Predator

June 8th, 2005 01:25

Just the spacer on the M4-S slither stock will have to be cut so it can fit the SR16 stock. I had it done on mine and it's fine.

Syrinx

June 8th, 2005 02:15

Thanks...

rufus

June 8th, 2005 11:26

Pics!

the end

June 12th, 2005 02:09

yeah that would look pretty cool, if possible you should try and get some pics of that, it would be nice to see

Syrinx

June 13th, 2005 20:07

Quote:

Originally Posted by the end

yeah that would look pretty cool, if possible you should try and get some pics of that, it would be nice to see

I will... it should arrive this week but I wont be able to make the modifications this week though. I'll send pics as soon as my mods are done.

vondnik

June 13th, 2005 20:28

installing the full stock is a real simple thing to do. same as all other crapalite series. rewireing the gun is well an other story but easy to do...modded two of them already

the end

June 14th, 2005 17:33

very good, i was thinking of doing the same mod
so some pics would be appreciated very much

RAS_Jackson

June 14th, 2005 17:58

Please keep in mind you may need a longer wire to move eveything to a sold stock. Also your probly going to have to dump the fuse plate and fuse. or you can try an RC hobby shop for a small fuse protector

Malinak

June 15th, 2005 10:52

Well, if the full stock comes complete with wiring he shouldnt need to worry about it none. The wiring should have a fuse holder built in, just add a new fuse and go.
Like what is found in the link below is all you ned to attach and rewire the stock:
http://www.wgcshop.com/pcart/shopper...16S_cat_Stocks

Syrinx

June 17th, 2005 22:41

As promise, here are some photos of my new TM M4 S-System with the full stock modification. As Vondnick said it was realy easy to do. The stock fit's like a glove. The only "tuff" part is to re-route the wires to the back. Of course, by doing this you have to open the gearbox. I used an SR-16 stock with all the wires and fuse attachement. Ho and don't forget the "stock spacer". You have to cut it down a little before the wires can get through.

So enjoy...

Click here for pictures

All times are GMT -4. The time now is 08:35.