Broxa evolution Jam
 

Hi, first time here, and first gun, its a Aftermath Broxa and so far its okay, i have had some problems, one main one is that no matter what i would do, it always shoots low and to the right, so any ideas on that would be nice. Also, i was trying to fix the shooting issue, and i got a jammed bb, its a normal 0.25 from my local range, and ive used these along with many others that use them, all the time. I turned the hop all the way off, removed clip and put it in fire, used the rod with the tipped end pointing the right way, and no matter what i did the bb wont come out, i cant push further and it seems that the bb isnt being pushed close enough to the hole to pop out. Does anyone have any ideas on either of these problems? and yes there high quality BB's not walmart ones etc.

Thanks

Also i kinda need to fix this before we play on sunday, and i would rather like to not half to take it apart or anything.

I have had this problem with my lycaon (same things pretty much) and the only way i found to fix this is to take apart the gun and the hop-up unit to get it out.

The hop-up rubber on the aftermath guns is a piece of crap. Even without changing the whole hop-up unit, a new quality rubber makes a world of difference.

+ 1 on that stick a gaurder clear in there and u will be happy

And it's not a CLIP. It's a magazine.

I was having misfeeds, jams, the works with my Broxa until i switched out the hop up bucking. I put a systema bucking with an H-nub in it and not only did the jams and misfeeds stop, but my accuracy, power and range jumped up a lot too. Its a cheap upgrade and well worth it. I hear guarder clears are good, but I wasn't sure how long the bucking would last because of how hot that gun shoots. Although i think the guarders are rated for up to 400 fps, not sure tho, thats why i got the systema black, played it safe...