Airsoft Canada
Page 2 of 2 1 2
Show 100 post(s) from this thread on one page

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Newbie Tank (https://airsoftcanada.com/forumdisplay.php?f=203)
-   -   Open bolt Vs Closed bolt (https://airsoftcanada.com/showthread.php?t=115200)

Eien January 23rd, 2011 21:13
Quote:
Originally Posted by turok_t (Post 1393715)
What about the hop up assembly, will that also be changed?
Yup.

turok_t January 23rd, 2011 21:17
And what about the trigger set, and trigger box and everything inside?

Andy n January 23rd, 2011 21:19
When I converted my PDW over to open bolt I didn't have to touch the trigger assemble but I did have to change the bolt catch.

Styrak January 23rd, 2011 23:02
Quote:
Originally Posted by ThunderCactus (Post 1393700)
As far as durability goes, the brass tube is a new design, few moving parts, things friction fit, etc.
Actually, the brass tube is an OLD design, much older than open bolt/GBB pistol systems. It was used in classic airsoft (Escort).

ThunderCactus January 25th, 2011 04:40
Well, it wasn't durable back then either, and it's been out of the loop too long with no real overhauls or upgrades.
Like AEP's, been around a while, but nobody really cares enough to make REALLY good upgrades lol

turok_t February 1st, 2011 13:45
So if im looking to get the new M4 open bolt kit, I understand that the following wont be compatible:

-RA tech NPAS
-RA tech hop up kit

Anything else that would need to be changed? Would RA tech inner barrels and trigger assembly/mechbox need to be changed as well?

spartan117 February 1st, 2011 13:46
Quote:
Originally Posted by turok_t (Post 1400170)
So if im looking to get the new M4 open bolt kit, I understand that the following wont be compatible:

-RA tech NPAS
-RA tech hop up kit

Anything else that would need to be changed? Would RA tech inner barrels and trigger assembly/mechbox need to be changed as well?
The inner barrels would need to change i believe they are compatible with hi capa hop up buckings (i think). Trigger assembly should be the same. Magazine feed lips would need to be changed as well.

turok_t February 1st, 2011 13:49
Quote:
Originally Posted by spartan117 (Post 1400173)
The inner barrels would need to change i believe they are compatible with hi capa hop up buckings (i think). Trigger assembly should be the same. Magazine feed lips would need to be changed as well.
So if I have existing RA tech barrels, I cant use them right?

Ross February 6th, 2011 00:00
Quote:
Originally Posted by turok_t (Post 1400178)
So if I have existing RA tech barrels, I cant use them right?
No, there are ra tech open bolt barrels, and ra tech closed bolt barrels.


All times are GMT -4. The time now is 20:20.
Page 2 of 2 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.